Although a pool is a generally very clean place, hotels or public venues may suffer from fluff and dust. Each Microwell dehumidifier can be equipped with an effective air filter on demand. Filter is designed to withstand harsh environment conditions of a pool chemical air content. The structure is made from fiberglass supported on an aluminum frame.
COMPATIBILITY: All DRY range
Each Microwell dehumidifier can be equipped with additional air heating on the top of heat recovery, either as Low Pressure Hot Water or Electrical heater. LPHW is designed as high temperature heating for heated water up to 90°C providing capacities 3.5kW, 5kW and 7kW. Electrical heating is an aluminium resistance 230V AC coil with capacities 2kW and 4kW. LPHW can be combined with Solenoid valve to result in completely automated heating system.
COMPATIBILITY: All DRY range
This tablet is a matter of course for the Dry Siren unit. We in the Microwell want you to use our product without having to buy an android/apple device
COMPATIBILITY: Dry Siren models
Antifreeze thermostat is a coil temperature sensor designed to prevent the dehumidifier’s coils from freezing. It allows dehumidifier to work effectively in ambient temperatures down to 15°C. Antifreeze thermostat can be used together with a thermostatic expansion valve (TEV) to create the widest operational temperature range of dehumidifier from 15°C to 42°C.
COMPATIBILITY: All DRY range
Most convenient extension of DRY Siren functionality is a Bluetooth speaker with output of 80W. Easily paired with any Bluetooth device, built-in Bluetooth speaker streams music, radio or podcast, enabling full and rich multimedia experience.
COMPATIBILITY: Dry Siren models
Built-in digital humidistat & thermostat is a convenient, accurate solution for temperature and humidity control. It is supplied by standard to all Metal, Silver and Duct swimming pool dehumidifier models. It helps to minimise the energy consumption and maintains normal humidity levels in any environment. The unit is also designed to be intuitive and self-explanatory.
COMPATIBILITY: All DRY range
Compressor unit for ceiling unit Dry Siren with lockable doors.
COMPATIBILITY: Dry Siren models
Each Microwell dehumidifier has an independent no-current contact for external gas boiler or heater. You can thus create a completely independent fully automatic heater out of your dehumidifier. Your dehumidifier will know when to heat, it will give signal to your gas boiler/heater to start and also it can control the circulation pump of hot water in system.
COMPATIBILITY: All DRY range
It’s included in SILVER models by standard. It consists of a special stainless steel polishing agent and a cloth.
COMPATIBILITY: DRY Silver range
Thermostatic expansion valve (TEV) controls the amount of refrigerant flow into the evaporator. By preventing the overheating, it allows dehumidifier to work effectively in ambient air temperature up to 42°C. This is effective mainly in spa and sauna areas. Thermostatic expansion valve (TEV) can be combined with Antifreeze thermostat to create the widest operational temperature range in the market from 15°C to 42°C.
Each Microwell dehumidifier has fresh air supply possibility. The air inlet is located under the condenser, that way the incoming fresh air is effectively heated at no cost thanks to heat recovery.
COMPATIBILITY: All DRY range
Microwell dehumidifiers can be equipped with hot gas defrost function to provide with an effective and continuous humidity control by ambient air temperatures from +5°C. Hot gas defrost uses four-way valve to reverse the refrigerant cycle and can effectively defreeze the dehumidifier with hot gas. Hot gas defrost is used in low temperature applications.
COMPATIBILITY: All DRY 300 and DRY 500 models
The installation layout is a 1: 1 copy of the dehumidifier dimensions. The diagram shows the dimensions and dimensions of the wall bracket, power cord positions, condensate drain position, hotplate connection position, and the position of all other fixing screws. The layout greatly facilitates and accelerates the installation of the dehumidifier as it can be drilled into the underlying material, such as the wall, without the need to measure or apply a separate dehumidifier.
COMPATIBILITY: DRY 300, DRY 400, DRY 500 models
Built-in LED lighting system is using 50W LED LAMP. With user-friendly options for adjusting light brightness and colour temperature the LAMP can be easily adjusted to meet any customer’s demands.
COMPATIBILITY: Dry Siren models
Connection options of Solenoid valve designed to control the heated water flow to and from the LPHW coil.
COMPATIBILITY: All DRY range
Microwell microLIGHT+ is a unique LED technology, designed for accurate measurement and intuitive reading of humidity level present in indoor environment. Working on the principle
of relative humidity reading, microLIGHT+ uses LED light to project colour instead of a measured figure. The colour moves in continuous gradient with blue indicating low humidity, green ideal humidity and red high humidity.
COMPATIBILITY: All DRY range
Microwell mobile stands are highly practical and lightweight mobile mounting solution for dehumidifiers. Designed to provide more flexibility, even distribution of weight and safe transport, mobile stands are made from metal frame mounted on four rotation casters. The frame is covered with anti-corrosive powder coating and can be additionally coloured in any RAL colour on demand.
COMPATIBILITY: DRY 300, DRY 400, DRY 500 models
Installation on the floor
COMPATIBILITY: Models of DRY800, DRY1200 series
Installation on the wall
COMPATIBILITY: All DRY range
Sometimes a specific set of pool parameters require a dehumidifier unit to be installed in exterior. Microwell offers a complete solution with 40mm aluminum covered insulation, condensate tray defrost and winter module allowing operations down to -15°C.
COMPATIBILITY: All DRY range
HYG 6001 is a remote wired device for monitoring and controlling of humidity. The unit is mounted on any surface and at any distance from a dehumidifier, communicating through a signal wire, which is directly connected to electro control box of a dehumidifier. It enables very easy management and regulation of required humidity level in real time with rotary humidistat, working within the range 30 to 100% Rh.
COMPATIBILITY: All DRY range
EASY 300 is a remote wireless device for monitoring and controlling humidity and air temperature. It communicates wirelessly through 866MHz interface with the dehumidifier and is able to set the requested humidity and air temperature in real time. Unit consists of the transmitter with highly intuitive digital display, receiver and antenna. Signal transmission works up to 30m in buildings or up to 100m in free spaces.
COMPATIBILITY: All DRY range
Solenoid valve is a 2-way electromagnetic valve designed to control the heated water flow to and from the LPHW coil. Each Microwell dehumidifier can be also equipped with a no-current contact for heat source, e.g. boiler or gas stove. Thus the system with solenoid valve together with thermostat (built-in digital or DRY EASY 300) enables completely autonomous and fully automated heating system.
COMPATIBILITY: All DRY models with LPHW coils
Screws or dowels for easier installation
COMPATIBILITY: All DRY range
Through-the-wall adapters are elegant ductwork solution for behind the wall installation of a dehumidifier. They are designed to supply and exhaust air through the ducts most effectively, especially in smaller pool rooms. Adapters can be fitted to any wall with thickness up to 400 mm. Anodised aluminium grills have flashy design. Through-the-wall air ducts with inlet/outlet grilles are perfect guarantee for air quality and comfort.
COMPATIBILITY: All DRY Through the wall & DUCT range
Console for installation on the wall
COMPATIBILITY: All DRY 300, 400, 500 range
Enjoy the experience of a custom-made piece of the art dehumidifier in your pool or in your customer’s pool. Why would you have only a box shaped machine placed in your swimming pool hall if you can have a piece of furniture designed according to your own taste and needs. Microwell offers the widest range of colors on the market.
We normally have 200+ colors in stock. Colouring based on our customers' own choice is free of charge and can be done typically within 48 hours. You can specify your desired color according to international RAL color coding. All RAL color codes please find here https://www.ralcolor.com/
COMPATIBILITY: DRY300Metal, DRY400Metal, DRY500Metal, DRY800Metal, DRY1200Metal
Download from
 |
 |  |
 |
Microwel heat pumps can be upgraded with a WIFI module. This includes small WIFI box enabling internet connection and Android/iOS application.
WIFI upgrade allows you:
To control your swimming pool 24/7 from anywhere in the world
Have constant ability to check the conditions of your pool
Be notified of an emergency situation
The system also allows Microwell to get technical readings of the heat pumps remotely on demand. To ensure 100% privacy data protection, the reading must be allowed by end user. Remote reading can help during installation or problem diagnosis.
Technicalities:
IEEE802.11b/g/n
2.412~2.484 GHz
Range: 30-50 meters
Security supported:
Standard worldwide
WPA-PSK / WPA2PSK
WEP64 / WEP128/ TKIP / CCMP(AES)WEP
System:
iOS / Android
COMPATIBILITY: All HP range without HP 1700
Microwell swimming pool heat pump is able to control the circulation pump. In principle should the heat pump be in need for heating/cooling it will automatically turn the circulation pump on.
COMPATIBILITY: All HP range
Suggested to all subzero operated heat pumps, this fully automatic addition helps to prevent the damage of a heat pump by keeping the condensate tray clean of ice.
COMPATIBILITY: All HP range
Microwell offers three options installation of control panel:
S standard: digital display placed on outside unit (air unit)
H digital display on remote heat exchanger (heat exchanger box to be installed
in interior)
W wall installation (out of the heat pump), includes wall plaster box, 30m cable
COMPATIBILITY: All HP range
Effectively protects the water heat exchanger against frost down to -15°C. Widens effective operational air temperature range of a heat pump and prevents any damage to occur.
COMPATIBILITY: All HP range
Hydro kit ist external water exchanger for Microwell HP Split unit´s. The hydro kit comes with a box (pictured) or without a box.
COMPATIBILITY: All HP Split range
Applied in a non-operation period, protection cover ensures protection to heat pump construction during all seasons.
COMPATIBILITY: All HP range
Heat pump’s sources of noise are compressor and a fan. These are installed in split heat pump’s outdoor unit which is placed away from a pool as far as 30 meters horizontally and 15 meters vertically. The result is warm water without seeing or hearing the heat pump working, effectively providing pleasant warmth.
COMPATIBILITY All HP Split range
Designed to enhance heat pump operation in subzero conditions, winter module consists of several elements that help to extend operational air temperature range down to -15°C.
COMPATIBILITY: All HP range
